https://github.com/Xinyuan-LilyGO/T-Display-S3?tab=readme-ov-file#4%EF%B8%8F%E2%83%A3--arduino-ide-manual-installation

• Téléchargement des bibliothèques:
  • $ cd Arduino
  • $ git clone https://github.com/Xinyuan-LilyGO/T-Display-S3.git
  • $ cp -r T-Display-S3/lib/* ~/Arduino/libraries/ (créer le dossier s'il n'existe pas)
• Utilisation version antérieur du firmware de la board (https://github.com/Bodmer/TFT_eSPI/issues/3355): Tools → Board → Boards manager → search ESP32 by Espressif → Install version 2.0.17
• Select board LILYGO T-Dysplay-S3
• Setect port /dev/ttACM0

// https://doc-tft-espi.readthedocs.io/tft_espi/methods/drawstring/
 
#include <TFT_eSPI.h>
 
TFT_eSPI tft = TFT_eSPI();
 
void setup() {
  tft.begin();
  tft.setRotation(1);
  tft.setTextColor(TFT_WHITE, TFT_BLACK);
}
 
void loop() {
  tft.fillScreen(TFT_BLACK);
  tft.drawString("Hello world !", 50, 70, 4);
  delay(500);
  tft.fillScreen(TFT_BLACK);
  delay(500);
}