==== LILYGO T-Display-S3 ====


[[https://github.com/Xinyuan-LilyGO/T-Display-S3?tab=readme-ov-file#4%EF%B8%8F%E2%83%A3--arduino-ide-manual-installation]]

  * Téléchargement des bibliothèques:
    * ''$ cd Arduino''
    * ''$ git clone https://github.com/Xinyuan-LilyGO/T-Display-S3.git''
    * ''$ cp -r T-Display-S3/lib/* ~/Arduino/libraries/'' (créer le dossier s'il n'existe pas)
  * Utilisation version antérieur du firmware de la board ([[https://github.com/Bodmer/TFT_eSPI/issues/3355]]): Tools -> Board -> Boards manager -> search ESP32 by Espressif -> Install version 2.0.17
  * Select board LILYGO T-Dysplay-S3
  * Setect port /dev/ttACM0

<code c>
// https://doc-tft-espi.readthedocs.io/tft_espi/methods/drawstring/

#include <TFT_eSPI.h>

TFT_eSPI tft = TFT_eSPI();

void setup() {
  tft.begin();
  tft.setRotation(1);
  tft.setTextColor(TFT_WHITE, TFT_BLACK);
}

void loop() {
  tft.fillScreen(TFT_BLACK);
  tft.drawString("Hello world !", 50, 70, 4);
  delay(500);
  tft.fillScreen(TFT_BLACK);
  delay(500);
}
</code>