Wiki

User Tools

Site Tools

Trace: • simple_moving_average_w_lisp
esp32_w_esp-idf

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
esp32_w_esp-idf [2025/03/28 20:14] – brunoesp32_w_esp-idf [2025/09/14 13:37] (current) – bruno
Line 1: Line 1:
-<code bash>+{{:20250914_152619.jpg?600|}}<code bash>
 sudo apt-get install git wget flex bison gperf python3 python3-pip python3-venv cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0 sudo apt-get install git wget flex bison gperf python3 python3-pip python3-venv cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0
 mkdir -p ~/esp mkdir -p ~/esp
Line 13: Line 13:
 # idf.py menuconfig # Component config  ---> ESP System Settings  ---> Channel for console output (Default: UART0)  ---> (X) USB CDC save quit # idf.py menuconfig # Component config  ---> ESP System Settings  ---> Channel for console output (Default: UART0)  ---> (X) USB CDC save quit
 idf.py build idf.py build
-idf.py -p /dev/ttyUSB0 flash monitor+idf.py -p /dev/ttyUSB0 flash monitor # ctrl-] to quit
 </code> </code>
esp32_w_esp-idf.1743192892.txt.gz · Last modified: 2025/03/28 20:14 by bruno