Differences

This shows you the differences between two versions of the page.

--- esp32_lilygo_t-display-s3 [2025/03/27 17:33] – bruno
+++ esp32_lilygo_t-display-s3 [2025/04/04 22:21] (current) – bruno
@@ Line 1: / Line 1: @@
+==== LILYGO T-Display-S3 ====
 [[https://github.com/Xinyuan-LilyGO/T-Display-S3?tab=readme-ov-file#4%EF%B8%8F%E2%83%A3--arduino-ide-manual-installation]]
-  * ''$ git clone https://github.com/Xinyuan-LilyGO/T-Display-S3.git''
+  * Téléchargement des bibliothèques:
-  * ''$ mv T-Display-S3/ Arduino/libraries/''
+    * ''$ cd Arduino''
-  *
+    * ''$ git clone https://github.com/Xinyuan-LilyGO/T-Display-S3.git''
+    * ''$ cp -r T-Display-S3/lib/* ~/Arduino/libraries/'' (créer le dossier s'il n'existe pas)
+  * Utilisation version antérieur du firmware de la board ([[https://github.com/Bodmer/TFT_eSPI/issues/3355]]): Tools -> Board -> Boards manager -> search ESP32 by Espressif -> Install version 2.0.17
+  * Select board LILYGO T-Dysplay-S3
+  * Setect port /dev/ttACM0
+<code c>
+// https://doc-tft-espi.readthedocs.io/tft_espi/methods/drawstring/
+#include <TFT_eSPI.h>
+TFT_eSPI tft = TFT_eSPI();
+void setup() {
+  tft.begin();
+  tft.setRotation(1);
+  tft.setTextColor(TFT_WHITE, TFT_BLACK);
+}
+void loop() {
+  tft.fillScreen(TFT_BLACK);
+  tft.drawString("Hello world !", 50, 70, 4);
+  delay(500);
+  tft.fillScreen(TFT_BLACK);
+  delay(500);
+}
+</code>